Case study

Scopri alcuni dei recenti progetti Turbo Separator realizzati con successo da Atritor.

TS3096SD system supplied to secure destruction company

Data di consegna 2019
Cliente Secure destruction plant
Sede The Midlands, UK
Applicazioni Separation of packaged products for secure destruction
Prodotti in entrata Out-of-specification, out-of-date products from factories and other sources
Prestazioni richieste 10.000 kg/h
Capacità del sistema 10.000 kg/h
Descrizione del sistema
  • TS3096SD Turbo Separator
  • Twin-screw in-feed conveyor with 5.5 m³ hopper
  • Single-screw conveyor for recovered material
  • Single-screw conveyor for separated packaging
TS3096SD system after being commissioned for secure destruction applications
TS3096SD system after being commissioned for secure destruction applications

The first TS3096SD model was supplied to a waste plant in England to separate packaged goods for secure destruction.

The new design TS3096SD with its swing-away doors and superior sealing system allows easy access into the separation chamber.

Shear pin paddles were fitted to avert potential damage caused by heavy foreign objects which may have accidently entered the separation chamber with the feed materials. The shear pin, when hit with a heavy object, will break allowing the paddle to swing away protecting it from being damaged.

A number of materials were tested including toothpaste, mouthwash, cosmetics, water-based paints, drinks and cigarettes, which at the time were being shredded before going to landfill or incineration.

After considering a number of options it was decided that the Atritor Turbo Separator was the preferred system to de-package their materials. Separating the materials now allows them the options to either recycle or reprocess the separated materials and not just send them for disposal.

The TS3096SD Turbo Separator system was installed in 2019.

TS3096 system supplied to waste management company

Data di consegna 2019
Cliente Council
Sede Guernsey
Applicazioni Recovery of organics for biogas and packaging for energy generation
Prodotti in entrata Packaged food waste and kitchen food waste
Prestazioni richieste 10.000 kg/h
Capacità del sistema 10.000 kg/h
Descrizione del sistema
  • TS3096 Turbo Separator
  • Twin-screw in-feed conveyor with 5.5 m³ hopper
  • Double-piston pump for recovered organic material
  • Single-screw conveyor for separated packaging
TS3096 system during installation on Guernsey
TS3096 system during installation on Guernsey

Due to limited space being available for landfill, a new waste and recycling facility was built to deal with municipal waste and food waste collected on Guernsey. They required a de-packaging system to separate the food from its packaging and separate the organics from kitchen food waste collected from the island’s houses, restaurants, hotels and hospitals.

After visiting several sites using different types of de-packaging systems, it was decided that the Atritor Turbo Separator produced the cleanest organics with the minimum amount of organics in the separated packaging when compared with other systems.

The recovered organic fractions have organic liquid added between the Turbo Separator outlet and double-piston pump inlet to achieve a solid matter content suitable for pumping. The organic matter is then pumped into tankers and transported to an anaerobic digestion facility where it produces gas which is used as a fuel in the generation of electricity. The separated packaging fraction is bailed and sent to an external facility where it is used as a fuel to produce energy.

The TS3096 Turbo Separator system was installed in early 2019.

TS3096 system supplied to waste management company

Data di consegna 2017
Cliente Waste management company
Sede Thessaloniki, Macedonia, Greece
Applicazioni Recovery of organics for biogas
Prodotti in entrata Out-of-specification, out-of-date supermarket waste
Prestazioni richieste 8.000 kg/h
Capacità del sistema 10.000 kg/h
Descrizione del sistema
  • TS3096 Turbo Separator
  • Twin-screw in-feed conveyor with 5.5 m³ hopper
  • Single-screw conveyor and pump for recovered material
  • Single-screw conveyor for separated packaging
TS3096 system for recovery of organics for biogas in Greece
TS3096 system for recovery of organics for biogas in Greece

As an established waste management and recycling company, the installation of an Atritor Turbo Separator system has allowed them to expand their services to offer full recycling of out-of-date and out-of-specification products. This system is equiped for both wet and dry separation as required.

TS42120 system supplied to waste composting company

Data di consegna 2016
Cliente Waste composting company
Sede Scotland, United Kingdom
Applicazioni Anaerobic digestion
Prodotti in entrata Packaged food waste
Prestazioni richieste 15.000 kg/h
Capacità del sistema Oltre 18.000 kg/h
Descrizione del sistema
  • TS42120 Turbo Separator
  • In-feed conveyor
  • Separated packaging conveyor
  • Double piston pump to convey recovered material feed stock
TS42120 de-packaging plant processing packaged food waste
TS42120 de-packaging plant processing packaged food waste

A waste composting company based in Scotland required a de-packaging system to de-package packaged supermarket food waste and kitchen food waste. In 2012 they purchased a second hand Atritor TS2096 model Turbo Separator which achieved the results and throughput required at the time. In 2015 they were approached by the operators of an anaerobic digestion plant which was being constructed on the west coast of Scotland which required a company to supply feed stock for their digesters. To meet the new requirements they needed to increase their vehicle food waste collection fleet and invest in a larger de-packaging system.

Although they were very pleased with their existing Turbo Separator it was decided that they would investigate what de-packaging systems were available before committing to a higher capacity system. After looking at several de-packaging system options and visiting sites using various types of de-packaging equipment it was decided that the Atritor TS42120 model Turbo Separator would meet the quality of feed stock material required by the anaerobic digestion plant whilst achieving the high throughputs needed by their plant.

An order was placed in 2016 for a TS42120 system complete with a double piston pump to convey the recovered material feed stock.

Given the success of the TS42120 Turbo Separator system they are now looking to expand their operation with a second de-packaging line.

TS3096 system supplied to waste management company

Data di consegna 2016
Cliente Waste management company
Sede Nogent sur Oise, France
Applicazioni Depackaging of biowaste products
Prodotti in entrata Supermarket waste, kitchen waste, agro-food waste
Prestazioni richieste Circa. 15.000 tonnellate all'anno
Capacità del sistema Oltre 10.000 kg/h
Descrizione del sistema
  • TS3096 Turbo Separator
  • Twin-screw in-feed conveyor with 5.5 m³ hopper
  • Packaging screw conveyor
  • NETSZCH progressive cavity pump
  • Automated control of storage tanks
De-packaging of biowaste products in France
De-packaging of biowaste products in France

This Turbo Separator system was installed to replace a PUTZMEISTER system, which was not suited to processing a variety of products.

TS3096 system supplied to major waste company

Data di consegna 2015
Cliente Major Swedish waste company
Sede Sweden
Applicazioni Recovery of organics for biogas
Prodotti in entrata Kitchen food waste, packaged supermarket food waste
Prestazioni richieste 10.000 tonnellate all'anno
Capacità del sistema 10.000 kg/h
Descrizione del sistema
  • TS3096 Turbo Separator
  • Twin-screw in-feed conveyor with 5.5 m³ hopper
  • Single-screw conveyor for separated packaging
  • Positive-displacement pump and macerator for recovered organics
TS3096 system for recovery of organics for biogas in Sweden
TS3096 system for recovery of organics for biogas in Sweden

As an established waste management and recycling company, the installation of an Atritor Turbo Separator system has allowed them to expand their services to offer full recycling of out-of-date and out-of-specification products. This system is equiped for both wet and dry separation as required.

A waste company located in Sweden required a system to de-package kitchen food waste and packaged supermarket food waste. The recovered organic material will be used to generate gas via an anaerobic digestion process which would be used as a fuel to generate electricity.

After visiting two UK sites which use Turbo Separator systems to separate organics from their packaging for feed stock to supply anaerobic digesters, an order was placed for a TS3096 system.

The system has now been running successfully for over three years and they are now planning to install Turbo Separator systems in their other plants.

TS1260 supplied to food manufacturer

Data di consegna 2015
Cliente Food manufacturer
Sede Lagos, Nigeria
Applicazioni Recovery of out-of-specification food products for reprocessing
Prestazioni richieste 1.000 kg/h
Capacità del sistema Oltre 1.000 kg/h
Descrizione del sistema
TS1260 for separating out-of-specification food products
TS1260 for separating out-of-specification food products

Since purchasing the Atritor Turbo Separator in 2015, this growing manufacturer of food flavouring products has saved thousands of tonnes of waste by de-packaging their out-of-specification products and recovering the separated product for other purposes.

They are now installing a second TS1260 as their production expands further.

Two TS3096 systems supplied to waste management company

Data di consegna 2014 + 2015
Cliente Waste management company
Sede Two sites in Poland
Applicazioni Separation of packaged products for secure destruction
Prodotti in entrata Out-of-spec, out-of-date products from factories
Prestazioni richieste 8.000 kg/h
Capacità del sistema Fino a 10.000 kg/h
Descrizione del sistema
Packaged product separation in Poland
Packaged product separation in Poland

This secure destruction company purchased their first TS3096 system in 2014, which fulfilled new contracts for unpacking food products. This soon extended into non-food products such as deodorants and cosmetics.

They installed a second machine in 2015 on another site to process canned food products.

TS3096 system supplied to aggregate producer

Data di consegna 2014
Cliente Aggregate producer
Sede Milan, Italy
Applicazioni Recovery of gypsum and paper elements
Prodotti in entrata Plasterboard
Prestazioni richieste 5.000 kg/h
Capacità del sistema Oltre 5.000 kg/h
Descrizione del sistema
  • TS3096 Turbo Separator
  • Twin-screw in-feed conveyor
  • Single-screw recovered material conveyor
  • Single-screw separated packaging conveyor
Plasterboard recycling system in Italy
Plasterboard recycling system in Italy

This customer is one of a number that focuses solely on taking in gypsum plasterboard and recycling its component materials.

As has become policy for many countries across the world, Italy has been working to keep plasterboard from demolition, construction and manufacturing out of landfill. Instead, the separated gypsum is collected for use in the making of new building materials and the paper is recycled.

Since our customer purchased the Atritor Turbo Separator, their services have been in increasing demand and working at capacity.

TS3096 system supplied to anaerobic digestion plant

Data di consegna 2014
Cliente Anaerobic digestion plant
Sede North East of England, United Kingdom
Applicazioni Anaerobic digestion
Prodotti in entrata Packaged supermarket food waste, kerbside collection kitchen food waste
Prestazioni richieste 8.000 kg/h
Capacità del sistema Circa. 10.000 kg/h
Descrizione del sistema
De-packaging plant processing packaged food waste and kitchen food waste
De-packaging plant processing packaged food waste and kitchen food waste

During 2014 an anaerobic digestion plant was designed and installed in the North East of England. Food waste was the main source of feed stock for the digester. To give maximum feed stock flexibility a de-packaging hall was included to allow them to take packaged supermarket food waste and kerbside collection kitchen food waste.

Several de-packaging systems were considered, including shredding and squeezing processes and liquid pulping processes, before the decision was made to purchase the Atritor TS3096 Turbo Separator system. One advantage of the Turbo Separator is that it can separate wet and dry materials and allowed them to add organic liquids independent of the separation process to achieve their required feed stock solid matter content.

The Turbo Separator achieved the cleanest recovered material with minimal organic content of the separated packaging when compared with the other de-packaging system options.

Turbo Separator system supplied to Langage Farm

Data di consegna 2013
Cliente Langage Farm
Sede Devon, UK
Applicazioni Separation of supermarket food waste for anaerobic digestion
Prodotti in entrata Out-of-specification, out-of-date food products from supermarkets
Prestazioni richieste 10.000 kg/h
Capacità del sistema 10.000 kg/h
Descrizione del sistema
  • Turbo Separator
  • In-feed conveyor with hopper
  • Screw conveyor for recovered material
  • Screw conveyor for separated packaging
Langage Farm AD plant
Langage Farm AD plant

Langage Farm is a family-owned dairy farm and production facility, which has been operating since 1980 in Plymouth, Devon, UK. The Farm has 350 dairy cows, four hundred acres of farmland and a factory producing dairy products, including ice cream and cream for the major supermarkets.

Read about Langage Farm's challenge and Atritor's solution (PDF 369 KB)

TS3096 system supplied to animal feed manufacturer

Data di consegna 2013–2017
Cliente Animal feed manufacturer
Sede Three sites in Australia
Applicazioni Animal feed
Prodotti in entrata Out-of-specification cereals, bread, cake and biscuits
Prestazioni richieste 10.000 kg/h
Capacità del sistema Fino a 10.000 kg/h
Descrizione del sistema
Trial assembly in Atritor's workshop
Trial assembly in Atritor's workshop

Prior to purchasing Atritor Turbo Separator de-packaging systems they used another make of de-packaging equipment which did not meet their requirements.

After researching what de-packaging systems were available it was decided that the Atritor Turbo Separator was the system that met their requirements both in the quality of the separated materials and the low running cost when compared with the other de-packaging equipment.

They purchased their first Turbo Separator in 2013 and were pleased with the separation results achieved on various packaged materials, reliability of the system, ease of maintenance and running costs. They have since purchased a further six Turbo Separators placing them in their plants in Victoria, New South Wales and Queensland.